No Hot Water in the House? A Step-by-Step Troubleshooting Guide

Table of Contents

Quick answer: Start simple: gas heater — check the gas valve is on and read the status light; relight the pilot once per the label. Electric heater — check the breaker and press the high-limit reset (power off first). Tankless — read the error code, check the gas supply and power, and clean the inlet filter. If hot water is missing at only one fixture, the problem is that faucet’s cartridge or mixing valve, not the heater.

Losing hot water is one of the most common plumbing calls. Here’s a logical checklist before you call — and what the likely fix is.

One fixture or the whole house?

If only one shower or faucet is cold, the cartridge or anti-scald valve in that fixture is usually the issue. If the whole house is cold, it’s the water heater.

Gas tank water heater

  1. Confirm the gas supply valve is open (handle parallel to the pipe).
  2. Read the status light blink code on the control.
  3. Relight the pilot once following the label.
  4. If it won’t stay lit — see why gas heaters shut off.

Electric tank water heater

  1. Check the breaker.
  2. With power off, press the reset button behind the upper panel.
  3. If it trips again, an element or thermostat has likely failed — element failure symptoms.

Tankless water heater

  1. Read the error code on the display.
  2. Confirm power and gas.
  3. Clean the cold-water inlet filter.
  4. Scale may need descaling — tankless care.

When to call

Leaks, gas smells, repeated tripping, or a heater past roughly 8–12 years old. Compare repair and replacement costs, or see emergency replacement. Smell gas? Leave and call Southwest Gas at 877-860-6020.

Frequently Asked Questions

Why do I suddenly have no hot water?

Common causes are a pilot outage or failed thermocouple on gas units, a tripped breaker or failed element on electric units, or an error on tankless units.

How do I reset my water heater?

Electric heaters have a reset button behind the upper panel (power off first). Gas heaters may need the pilot relit per the label.

Why is only one shower cold?

Usually that fixture’s cartridge or mixing valve, not the water heater.

Does APS Plumbing offer 24/7 water heater repair?

Yes, across Scottsdale, Phoenix and the Valley.

Need a plumber in Scottsdale or Phoenix?

APS Plumbing (Aqua Plumbing Services LLC) answers 24/7 across Scottsdale, Phoenix, Paradise Valley, Tempe, Mesa, Chandler, Gilbert and Glendale. 10% off for military personnel and 12 months no-interest financing available.

Call (480) 572-4807   Book online

Leave a Reply

Your email address will not be published. Required fields are marked *

Recent Blog Post

No Hot Water in the House? A Step-by-Step Troubleshooting Guide
Kitchen Sink Clogged on Both Sides? How to Clear It Safely
How Much Does a Plumber Cost in Phoenix? (2026 Guide)
Sewer Smell in Your House? 7 Causes and How to Fix Them
Water Heater Leaking From the Bottom: What It Means and What to Do
Why Does My Hot Water Smell Like Rotten Eggs? (Arizona Guide)
Do Homeowners Need Backflow Testing in Arizona? Residential Guide
Toilet Keeps Running? 6 Common Causes and How to Fix Them
How Much Do Plumbing Repairs Cost in Phoenix? 2026 Price Guide
Plumbing in Paradise Valley, AZ: Water Providers, Luxury Homes & Homeowner Guide
Facebook
Twitter
LinkedIn